Compressor vibration can cause the following hazards:

1. Vibration will increase the power consumption;

2. Vibration will cause the instrument to malfunction or even damage;

3. Vibration will accelerate wear on the frictional contact surface;

4. Vibrating assembly causes pulling cylinders and burning tiles;

5. The vibration assembly makes the pipe cracking and loose flange connection;

6. The vibration assembly increases the noise of the machine and deteriorates the working conditions of the operator;

7. The vibration assembly shortens the service life of the machine.

To eliminate the vibration of the compressor, generally start from the following ways:

1. The moving parts must be balanced statically and dynamically, otherwise it will cause congenital vibration factors.

2. The concentricity of the compressor and the motor or diesel engine is correct.

3. The foundation of the compressor must be constructed strictly in accordance with the design drawings. There must be no rigid connection between the foundation and any structure of the building.

4. The vibrations caused by the pulsation of the air flow must ensure that the attached equipment and piping should have a firm support and a card, and that the cantilever chaos should be reinforced with a horn and plugged with a horn.

5. The tightening force of the foot screw of the machine should be consistent;

6. The frame (frame) should have sufficient rigidity.